Method of Green’s Function for Characterization of SH Waves in Porous-Piezo Composite Structure with a Point Source

Document Type: Research Paper

Authors

Department of Mathematics and Computing, Indian Institute of Technology (Indian School of Mines) Dhanbad, India

10.22034/jsm.2019.583053.1372

Abstract

An approach of Green’s function is adopted to solve the inhomogeneous linear differential equations representing wave equations in piezo-composite materials. In particular, transference of horizontally polarised shear (SH) waves is considered in bedded structure comprising of porous-piezo electric layer lying over a heterogeneous half-space. Propagation of SH-waves is considered to be influenced by point source, situated in the heterogeneous substrate. A closed form analytical solution is obtained to establish the dispersion relation. Remarkable influence of different parameters (like elastic constant, piezoelectric constant, heterogeneity parameter, initial stress and layers thickness) on the phase and group velocity are shown graphically. Moreover, a special case of present study is shown by replacing the porous piezoelectric material with piezoelectric material. Some numerical examples are illustrated by taking the material constants of Lead Zirconate Titanate (PZT-1, PZT-5H and PZT-7) for the porous piezoelectric layer where the phase velocity of SH waves is high rather than that of piezoelectric layer.

Keywords


[1] Ezzin H., Amor M.B., Ghozlen M.H.B., 2017, Propagation behavior of SH waves in layered piezoelectric/piezomagnetic plates, Acta Mechanica 228(3): 1071-1081.
[2] Ezzin H., Amor M.B., Ghozlen M.H.B., 2017, Lamb waves propagation in layered piezoelectric/piezomagnetic plates, Ultrasonics 76: 63-69.
[3] Alam P., Kundu S., 2017, Influences of heterogeneities and initial stresses on the propagation of love-type waves in a transversely isotropic layer over an inhomogeneous half-space, Journal of Solid Mechanics 9(4): 783-793.
[4] Sahu S.A., Singhal S., Chaudhary S., 2017, Influence of heterogeneity on Rayleigh wave propagation in an incompressible medium bonded between two half-spaces, Journal of Solid Mechanics 9(3): 555-567.
[5] Sahu S.A., Singhal A., Chaudhary S., 2017, Surface wave propagation in functionally graded piezoelectric material: An analytical solution, Journal of Intelligent Material Systems and Structures 29: 423-437.
[6] Kumar R., Gupta R.R., 2010, Study of wave motion in an anisotropic fiber-reinforced thermoelastic solid, Jounral of Solid Mechanics 2(1): 91-100.
[7] Chaudhary S., Sahu S., Singhal A., 2017, Analytic model for Rayleigh wave propagation in piezoelectric layer overlaid orthotropic substratum, Acta Mechanica 228(2): 495-529.
[8] Singhal A., Sahu S.A., Chaudhary S., 2018, Liouville-Green approximation: An analytical approach to study the elastic waves vibrations in composite structure of piezo material, Composite Structures 184: 714-727.
[9] Kumar V., Jiwari R., Kumar G. R., 2013, Numerical simulation of two dimensional quasilinear hyperbolic equations by polynomial differential quadrature method, Engineering Computations 30(7): 892-909.
[10] Verma A., Jiwari R., 2015, Cosine expansion based differential quadrature algorithm for numerical simulation of two dimensional hyperbolic equations with variable coefficients, International Journal of Numerical Methods for Heat & Fluid Flow 25(7): 1574-1589.
[11] Ghosh M.L., 1963, On love waves across the ocean, Geophysical Journal International 7(3): 350-360.
[12] Chattopadhyay A., Singh A.K., 2011, Effect of point source and heterogeneity on the propagation of magnetoelastic shear wave in a monoclinic medium, International Journal of Engineering, Science and Technology 3(2): 68-83.
[13] Chattopadhyay A., Gupta S., Kumari P., Sharma V., 2012, Effect of point source and heterogeneity on the propagation of SH-waves in a viscoelastic layer over a viscoelastic half space, Acta Geophysica 60(1): 119-139.
[14] Chattopadhyay A., Kar B.K., 1981, Love waves due to a point source in an isotropic elastic medium under initial stress, International Journal of Non-Linear Mechanics 16(3-4): 247-258.
[15] Singh A.K., Das A., Ray A., Chattopadhyay A., 2018, On point source influencing Love-type wave propagation in a functionally graded piezoelectric composite structure: A Green’s function approach, Journal of Intelligent Material Systems and Structures 29(9): 1928-1940.
[16] Singhal A., Sahu S.A., Chaudhary S., 2018, Approximation of surface wave frequency in piezo-composite structure, Composites Part B: Engineering 144: 19-28.
[17] Chaudhary S., Sahu S.A., Dewangan N., Singhal A., 2018, Stresses produced due to moving load in a prestressed piezoelectric substrate, Mechanics of Advanced Materials and Structures 26(12): 1028-1041.
[18] Othmani C., Takali F., Njeh A., Ghozlen M.H.B., 2017, Numerical simulation of Lamb waves propagation in a functionally graded piezoelectric plate composed of GaAs-AlAs materials using Legendre polynomial approach, Optik-International Journal for Light and Electron Optics 142: 401-411.
[19] Othmani C., Takali F., Njeh A., 2017, Investigating and modeling of effect of piezoelectric material parameters on shear horizontal (SH) waves propagation in PZT-5H, PMN-0.33 PT and PMN-0.29 PT plates, Optik-International Journal for Light and Electron Optics 148: 63-75.
[20] Borodina I.A., Zaitsev B.D., Kuznetsova I.E., Teplykh A.A., 2013, Correspondence-Acoustic waves in a structure containing two piezoelectric plates separated by an air (vacuum) gap, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 60(12): 2677-2681.
[21] Kuznetsova I.E., Zaitsev B.D., Joshi S.G., Borodina I.A., 2001, Investigation of acoustic waves in thin plates of lithium niobate and lithium tantalate, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 48(1): 322-328.
[22] Vashishth A.K., Gupta V., 2009, Vibrations of porous piezoelectric ceramic plates, Journal of Sound and Vibration 325(4-5): 781-797.
[23] Kumar R., Hundal B.S., 2009, Surface wave propagation in a fluid-saturated incompressible porous layer lying between an empty porous elastic layer and an empty elastic porous half-space, Journal of Porous Media 12(5): 387-402.
[24] Vashishth A.K., Gupta V., 2015, 3-D waves in porous piezoelectric materials, Mechanics of Materials 80: 96-112.
[25] Chaudhary S., Sahu S.A., Singhal A., 2018, On secular equation of SH waves propagating in pre-stressed and rotating piezo-composite structure with imperfect interface, Journal of Intelligent Material Systems and Structures 29(10): 2223-2235.
[26] Baroi J., Sahu S.A., Singh M.K., 2018, Dispersion of polarized shear waves in viscous liquid over a porous piezoelectric substrate, Journal of Intelligent Material Systems and Structures 29(9): 2040-2048.
[27] Pan E., Han F., 2004, Green's functions for transversely isotropic piezoelectric multilayered half-spaces, Journal of Engineering Mathematics 49(3): 271-288.
[28] Singh A.K., Lakshman A., Mistri K.C., Pal M.K., 2018, Torsional surface wave propagation in an imperfectly bonded corrugated initially-stressed poroelastic sandwiched layer, Journal of Porous Media 21(6): 499-522.
[29] Shodja H.M., Eskandari S., Eskandari M., 2016, Shear horizontal surface acoustic waves in functionally graded magneto-electro-elastic half-space, Journal of Engineering Mathematics 97(1): 83-100.
[30] Kong Y., Tian R., Xu J., Liu J., 2018, Propagation behavior of SH waves in a piezomagnetic substrate with an orthorhombic piezoelectric layer, Applied Mathematics and Mechanics 39(2): 207-218.
[31] Chattopadhyay A., Pal A.K., Chakraborty M., 1984, SH waves due to a point source in an inhomogeneous medium, International Journal of Non-Linear Mechanics 19(1): 53-60.
[32] Vashishth A.K., Dahiya A., Gupta V., 2015, Generalized bleustein-gulyaev type waves in layered porous piezoceramic structure, Applied Mathematics and Mechanics 36(9): 223-242.